tank bag electrification

Tank Bag Electrification as described here is an invasive procedure!

You’ll be cutting holes in your tank bag using a soldering iron to melt the edges of the hole. The soldering iron will melt the polyester and prevent the holes from fraying but you will be making irreparable holes in your tank bag. This really works but it is quite invasive and there’s no going back once the holes are cut and melted. So, follow these guidelines at your own risk!


Installing the Luggage Electrix PTB-004

Having power in my tank bag has revolutionized my life (not really but it has been handy). While the instructions in the kit were pretty good, pictures help a great deal so I’ve put together this page to help others see that this isn’t really that hard. Enjoy!

The first thing you need to do is collect up the bits you’ll need. While there are a couple of motorcycle shops around town listed as dealers for the manufacturer of the electrification kit, neither had the kit in stock when I called so I once again turned to Amazon. These are the pieces I ordered to power my phone and GPS:

You’re also going to need a couple of other things if you want to get this done without stopping to go get more stuff:

  • your tank bag – OK, duh, but I wanted a way to re-warn readers. This is an invasive procedure! If your tank bag is a vintage, irreplaceable make or model, think about picking up a used one off craigslist to give this a try.
  • a paint pen to mark the holes you need to make
  • a soldering iron with a fine tip – you won’t be using it to solder any wires; you’ll be using this like a knife
  • a tube of RTV silicone to prevent any leaks should you get caught in the rain

The next thing you need to do is read the instructions in the kit. The instructions are clearly written and will guide you through the process. Read them through a couple of times to make sure you understand what they’re wanting you to do. The pictures that follow will give you an idea of how I executed the instructions.

There are a couple of things to think about when you’re planning this mod. Think about how much room you have between you and the tank bag when it comes to connecting the power. To keep things roomy for me, I installed the power port on the front of the bag so I wouldn’t knock it around getting on and off the bike. This meant that I needed to think about how to deliver the power to the front of the bike. To do that I routed the power under the fuel tank. This gives me a nice clean look and keeps the power plug safely up front.


Installing the Luggage Electrix PTB-004 Photo Gallery

This project was a lot of fun and made my tank bag even more useful!